UIAxes Properties
UI axes appearance and behavior
UIAxes
properties control the appearance and
behavior of a UIAxes
object. By changing property
values, you can modify certain aspects of the axes.
ax = uiaxes;
ax.Color = 'blue';
The properties listed here are valid for axes in App Designer, or in figures created
with the uifigure
function. For axes used in GUIDE, or in apps
created with the figure
function, see Axes Properties.
Font
FontName
— Font name
system supported font name
Font name, specified as a system supported font name. The default font depends on the specific operating system and locale.
If the specified font is not available, then MATLAB® uses the best match among the fonts available on the system where the app is running.
Example: 'Arial'
FontSize
— Font size
scalar numeric value
Font size, specified as a scalar numeric value. The font size affects the title, axis labels, and tick labels. It also affects any legends or colorbars associated with the axes. By default, the font size is measured in pixels. The default font size depends on the specific operating system and locale.
MATLAB automatically scales some of the text to a percentage of the axes font size.
Titles and axis labels — 110% of the axes font size by default. To control the scaling, use the
TitleFontSizeMultiplier
andLabelFontSizeMultiplier
properties.Legends and colorbars — 90% of the axes font size by default. To specify a different font size, set the
FontSize
property for theLegend
orColorbar
object instead.
Example: ax.FontSize = 12
FontSizeMode
— Selection mode for font size
'auto'
(default) | 'manual'
Selection mode for the font size, specified as one of these values:
'auto'
— Font size specified by MATLAB. If you resize the axes to be smaller than the default size, the font size might scale down to improve readability and layout.'manual'
— Font size specified manually. Do not scale the font size as the axes size changes. To specify the font size, set theFontSize
property.
FontWeight
— Character thickness
'normal'
(default) | 'bold'
Character thickness, specified as 'normal'
or
'bold'
.
MATLAB uses the FontWeight
property to select a font from
those available on your system. Not all fonts have a bold weight. Therefore, specifying
a bold font weight can still result in the normal font weight.
FontAngle
— Character slant
'normal'
(default) | 'italic'
Character slant, specified as 'normal'
or
'italic'
.
Not all fonts have both font styles. Therefore, the italic font might look the same as the normal font.
LabelFontSizeMultiplier
— Scale factor for label font size
1.1
(default) | numeric value greater than 0
Scale factor for the label font size, specified as a numeric value greater
than 0. The scale factor is applied to the value of the
FontSize
property to determine the font size for
the x-axis, y-axis, and
z-axis labels.
Example: ax.LabelFontSizeMultiplier = 1.5
TitleFontSizeMultiplier
— Scale factor for title font size
1.1
(default) | numeric value greater than 0
Scale factor for the title font size, specified as a numeric value greater than 0. The scale factor is applied to the value of the FontSize
property to determine the font size for the title.
TitleFontWeight
— Title character thickness
'bold'
(default) | 'normal'
Title character thickness, specified as one of these values:
'normal'
— Default weight as defined by the particular font'bold'
— Thicker characters than normal
SubtitleFontWeight
— Subtitle character thickness
'normal'
(default) | 'bold'
Subtitle character thickness, specified as one of these values:
'normal'
— Default weight as defined by the particular font'bold'
— Thicker characters than normal
FontUnits
— Font size units
'pixels'
(default) | 'inches'
| 'centimeters'
| 'normalized'
| 'points'
Font size units, specified as one of the values in this table.
Units | Description |
---|---|
'points' | Points. One point equals 1/72 inch. |
'inches' | Inches. |
'centimeters' | Centimeters. |
'normalized'
| Interpret font size as a fraction of the axes height.
If you resize the axes, the font size modifies
accordingly. For example, if the
FontSize is
0.1 in normalized units, then the
text is 1/10 of the height value stored in the axes
Position property. |
'pixels' | Pixels. Starting in R2015b, distances in pixels are independent of your system resolution on Windows® and Macintosh systems.
|
To set both the font size and the font units in a single function call,
you first must set the FontUnits
property so that the
UIAxes
object correctly interprets the specified font
size.
FontSmoothing
— Character smoothing
'on'
Character smoothing, returned as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Note
Font smoothing is always on regardless of the value of this property. Changing the value has no effect.
Ticks
XTick
, YTick
, ZTick
— Tick values
[]
(default) | vector of increasing values
Tick values, specified as a vector of increasing values. If you do not
want tick marks along the axis, then specify an empty vector
[]
. The tick values are the locations along the axis
where the tick marks appear. The tick labels are the labels that you see
next to each tick mark. Use the XTickLabels
,
YTickLabels
, and ZTickLabels
properties to specify the associated labels.
Example: ax.XTick = [2 4 6 8 10]
Example: ax.YTick = 0:10:100
Alternatively, use the xticks
, yticks
, and zticks
functions to specify
the tick values. For an example, see Specify Axis Tick Values and Labels.
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| categorical
| datetime
| duration
XTickMode
, YTickMode
, ZTickMode
— Selection mode for tick values
'auto'
(default) | 'manual'
Selection mode for the tick values, specified as one of these values:
'auto'
— Automatically select the tick values based on the range of data for the axis.'manual'
— Manually specify the tick values. To specify the values, set theXTick
,YTick
, orZTick
property.
Example: ax.XTickMode = 'auto'
XTickLabel
, YTickLabel
, ZTickLabel
— Tick labels
''
(default) | cell array of character vectors | string array | categorical array
Tick labels, specified as a cell array of character vectors, string array,
or categorical array. If you do not want tick labels to show, then specify
an empty cell array {}
. If you do not specify enough
labels for all the ticks values, then the labels repeat.
Tick labels support TeX and LaTeX markup. See the
TickLabelInterpreter
property for more
information.
If you specify this property as a categorical array, MATLAB uses the values in the array, not the categories.
As an alternative to setting this property, you can use the xticklabels
, yticklabels
, and zticklabels
functions. For
an example, see Specify Axis Tick Values and Labels.
Example: ax.XTickLabel =
{'Jan','Feb','Mar','Apr'}
XTickLabelMode
, YTickLabelMode
, ZTickLabelMode
— Selection mode for tick labels
'auto'
(default) | 'manual'
Selection mode for the tick labels, specified as one of these values:
'auto'
— Automatically select the tick labels.'manual'
— Manually specify the tick labels. To specify the labels, set theXTickLabel
,YTickLabel
, orZTickLabel
property.
Example: ax.XTickLabelMode = 'auto'
TickLabelInterpreter
— Tick label interpreter
'tex'
(default) | 'latex'
| 'none'
Tick label interpreter, specified as one of these values:
'tex'
— Interpret labels using a subset of the TeX markup.'latex'
— Interpret labels using a subset of LaTeX markup. When you specify the tick labels, use dollar signs around each element in the cell array.'none'
— Display literal characters.
TeX Markup
By default, MATLAB supports a subset of TeX markup. Use TeX markup to add superscripts and subscripts, modify the text type and color, and include special characters in the labels.
Modifiers remain in effect until the end of the text.
Superscripts and subscripts are an exception because they modify only the next character or the
characters within the curly braces. When you set the interpreter to 'tex'
,
the supported modifiers are as follows.
Modifier | Description | Example |
---|---|---|
^{ } | Superscript | 'text^{superscript}' |
_{ } | Subscript | 'text_{subscript}' |
\bf | Bold font | '\bf text' |
\it | Italic font | '\it text' |
\sl | Oblique font (usually the same as italic font) | '\sl text' |
\rm | Normal font | '\rm text' |
\fontname{ | Font name — Replace
with the name of
a font family. You can use this in combination with other modifiers. | '\fontname{Courier} text' |
\fontsize{ | Font size —Replace
with a numeric
scalar value in point units. | '\fontsize{15} text' |
\color{ | Font color — Replace
with one of
these colors: red , green ,
yellow , magenta ,
blue , black ,
white , gray ,
darkGreen , orange , or
lightBlue . | '\color{magenta} text' |
\color[rgb]{specifier} | Custom font color — Replace
with a
three-element RGB triplet. | '\color[rgb]{0,0.5,0.5} text' |
This table lists the supported special characters for the
'tex'
interpreter.
Character Sequence | Symbol | Character Sequence | Symbol | Character Sequence | Symbol |
---|---|---|---|---|---|
| α |
| υ |
| ~ |
| ∠ |
| ϕ |
| ≤ |
|
|
| χ |
| ∞ |
| β |
| ψ |
| ♣ |
| γ |
| ω |
| ♦ |
| δ |
| Γ |
| ♥ |
| ϵ |
| Δ |
| ♠ |
| ζ |
| Θ |
| ↔ |
| η |
| Λ |
| ← |
| θ |
| Ξ |
| ⇐ |
| ϑ |
| Π |
| ↑ |
| ι |
| Σ |
| → |
| κ |
| ϒ |
| ⇒ |
| λ |
| Φ |
| ↓ |
| µ |
| Ψ |
| º |
| ν |
| Ω |
| ± |
| ξ |
| ∀ |
| ≥ |
| π |
| ∃ |
| ∝ |
| ρ |
| ∍ |
| ∂ |
| σ |
| ≅ |
| • |
| ς |
| ≈ |
| ÷ |
| τ |
| ℜ |
| ≠ |
| ≡ |
| ⊕ |
| ℵ |
| ℑ |
| ∪ |
| ℘ |
| ⊗ |
| ⊆ |
| ∅ |
| ∩ |
| ∈ |
| ⊇ |
| ⊃ |
| ⌈ |
| ⊂ |
| ∫ |
| · |
| ο |
| ⌋ |
| ¬ |
| ∇ |
| ⌊ |
| x |
| ... |
| ⊥ |
| √ |
| ´ |
| ∧ |
| ϖ |
| ∅ |
| ⌉ |
| 〉 |
| | |
| ∨ |
| 〈 |
| © |
LaTeX Markup
To use LaTeX markup, set the TickLabelInterpreter
property to
'latex'
. Use dollar symbols around the labels, for example, use
'$\int_1^{20} x^2 dx$'
for inline mode or '$$\int_1^{20} x^2
dx$$'
for display mode.
The displayed text uses the default LaTeX font style. The FontName
,
FontWeight
, and FontAngle
properties do not have
an effect. To change the font style, use LaTeX markup within the text. The maximum size of
the text that you can use with the LaTeX interpreter is 1200 characters. For multiline text,
the maximum size of the text reduces by about 10 characters per line.
For examples that use TeX and LaTeX, see Greek Letters and Special Characters in Chart Text. For more information about the LaTeX system, see The LaTeX Project website at https://www.latex-project.org/.
XTickLabelRotation
, YTickLabelRotation
, ZTickLabelRotation
— Tick label rotation
0
(default) | numeric value in degrees
Tick label rotation, specified as a numeric value in degrees. Positive values give counterclockwise rotation. Negative values give clockwise rotation.
Example: ax.XTickLabelRotation = 45
Example: ax.YTickLabelRotation = 90
Alternatively, use the xtickangle
, ytickangle
, and ztickangle
functions.
XTickLabelRotationMode
, YTickLabelRotationMode
, ZTickLabelRotationMode
— Selection mode for tick label rotation
'auto'
(default) | 'manual'
Selection mode for the tick label rotation, specified as one of these values:
'auto'
— Automatically select the tick label rotation.'manual'
— Use a tick label rotation that you specify. To specify the rotation, set theXTickLabelRotation
,YTickLabelRotation
, orZTickLabelRotation
property.
XMinorTick
, YMinorTick
, ZMinorTick
— Minor tick marks
'off'
| on/off logical value
Minor tick marks, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A value of 'on'
is
equivalent to true
, and 'off'
is
equivalent to false
. Thus, you can use the value of this
property as a logical value. The value is stored as an on/off logical value
of type matlab.lang.OnOffSwitchState
.
'on'
— Display minor tick marks between the major tick marks on the axis. The space between the major tick marks determines the number of minor tick marks. This value is the default for an axis with a log scale.'off'
— Do not display minor tick marks. This value is the default for an axis with a linear scale.
Example: ax.XMinorTick = 'on'
TickDir
— Tick mark direction
'in'
(default) | 'out'
| 'both'
| 'none'
Tick mark direction, specified as one of these values:
'in'
— Direct the tick marks inward from the axis lines. (Default for 2-D views)'out'
— Direct the tick marks outward from the axis lines. (Default for 3-D views)'both'
— Center the tick marks over the axis lines.'none'
— Do not display any tick marks.
TickDirMode
— Selection mode for TickDir
'auto'
(default) | 'manual'
Selection mode for the TickDir
property,
specified as one of these values:
'auto'
— Automatically select the tick direction based on the current view.'manual'
— Manually specify the tick direction. To specify the tick direction, set theTickDir
property.
Example: ax.TickDirMode = 'auto'
TickLength
— Tick mark length
[0.01 0.025]
(default) | two-element vector
Tick mark length, specified as a two-element vector of the form
[2Dlength 3Dlength]
. The first element is the tick
mark length in 2-D views and the second element is the tick mark length in
3-D views. Specify the values in units normalized relative to the longest of
the visible x-axis, y-axis, or
z-axis lines.
Example: ax.TickLength = [0.02 0.035]
Rulers
XLim
, YLim
, ZLim
— Minimum and maximum axis limits
[0 1]
(default) | two-element vector of the form [min max]
Minimum and maximum limits, specified as a two-element vector of the form
[min max]
, where max
is greater than
min
. You can specify the limits as numeric, categorical,
datetime, or duration values. However, the type of values that you specify must match
the type of values along the axis.
You can specify both limits, or specify one limit and let MATLAB automatically calculate the other. For an automatically calculated minimum
or maximum limit, use -inf
or inf
, respectively.
MATLAB uses the 'tight'
limit method to calculate the
corresponding limit.
Example: ax.XLim = [0 10]
Example: ax.YLim = [-inf 10]
Example: ax.ZLim = [0 inf]
Alternatively, use the xlim
, ylim
, and zlim
functions to set the limits. For an
example, see Specify Axis Limits.
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| datetime
| duration
XLimMode
, YLimMode
, ZLimMode
— Selection mode for axis limits
'auto'
(default) | 'manual'
Selection mode for the axis limits, specified as one of these values:
'auto'
— Enable automatic limit selection, which is based on the total span of the plotted data and the value of theXLimitMethod
,YLimitMethod
, orZLimitMethod
property.'manual'
— Manually specify the axis limits. To specify the axis limits, set theXLim
,YLim
, orZLim
property.
Example: ax.XLimMode = 'auto'
XLimitMethod
, YLimitMethod
, ZLimitMethod
— Axis limit selection method
'tickaligned'
(default) | 'tight'
| 'padded'
Axis limit selection method, specified as a value from the table. The examples in the table show the approximate appearance for different values of the XLimitMethod
property. Your results might differ depending on your data, the size of the axes, and the type of plot you create.
Value | Description | Example (XLimitMethod ) |
---|---|---|
'tickaligned' | In general, align the edges of the axes box with the tick marks that are closest to your data without excluding any data. The appearance might vary depending on the type of data you plot and the type of chart you create. |
|
'tight' | Fit the axes box tightly around the data by setting the axis limits equal to the range of the data. |
|
'padded' | Fit the axes box around the data with a thin margin of padding on each side. The width of the margin is approximately 7% of your data range. |
|
Note
The axis limit method has no effect when the corresponding mode property (XLimMode
, YLimMode
, or ZLimMode
) is set to 'manual'
.
XAxis
, YAxis
, ZAxis
— Axis ruler
ruler object
Axis ruler, returned as a ruler object. The ruler controls the appearance and behavior of the x-axis, y-axis, or z-axis. Modify the appearance and behavior of a particular axis by accessing the associated ruler and setting ruler properties. The type of ruler that MATLAB creates for each axis depends on the plotted data. For a list of ruler properties, see:
For example, access the ruler for the x-axis through
the XAxis
property. Then, change the
Color
property of the ruler, and thus the color of
the x-axis, to red. Similarly, change the color of the
y-axis to
green.
ax = gca; ax.XAxis.Color = 'r'; ax.YAxis.Color = 'g';
Axes
object has two y-axes, then the
YAxis
property stores two ruler objects.
XAxisLocation
— x-axis location
'bottom'
(default) | 'top'
| 'origin'
x-axis location, specified as one of the values in this table. This property applies only to 2-D views.
Value | Description | Result |
---|---|---|
'bottom' | Bottom of the axes. Example:
| |
'top' | Top of the axes. Example:
| |
'origin' | Through the origin point (0,0). Example:
|
YAxisLocation
— y-axis location
'left'
(default) | 'right'
| 'origin'
y-axis location, specified as one of the values in this table. This property applies only to 2-D views.
Value | Description | Result |
---|---|---|
'left' | Left side of the axes. Example:
| |
'right' | Right side of the axes. Example:
| |
'origin' | Through the origin point (0,0). Example:
|
XColor
, YColor
, ZColor
— Color of axis line, tick values, and labels
[0.15 0.15 0.15]
(default) | RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Color of the axis line, tick values, and labels in the
x, y, or
z direction, specified as an RGB triplet, a
hexadecimal color code, a color name, or a short name. The color also
affects the grid lines, unless you specify the grid line color using the
GridColor
or MinorGridColor
property.
For a custom color, specify an RGB triplet or a hexadecimal color code.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
, for example,[0.4 0.6 0.7]
.A hexadecimal color code is a string scalar or character vector that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Therefore, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" | |
"none" | Not applicable | Not applicable | Not applicable | No color |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
Example: ax.XColor = [1 1 0]
Example: ax.YColor = 'yellow'
Example: ax.ZColor = '#FFFF00'
XColorMode
— Property for setting x-axis grid color
'auto'
(default) | 'manual'
Property for setting the x-axis grid color, specified
as 'auto'
or 'manual'
. The mode value
only affects the x-axis grid color. The
x-axis line, tick values, and labels always use the
XColor
value, regardless of the mode.
The x-axis grid color depends on both the
XColorMode
property and the
GridColorMode
property, as shown
here.
XColorMode | GridColorMode | x-Axis Grid Color |
---|---|---|
'auto' | 'auto' | GridColor property |
'manual' | GridColor property | |
'manual' | 'auto' | XColor property |
'manual' | GridColor property |
The x-axis minor grid color depends on both the
XColorMode
property and the
MinorGridColorMode
property, as shown
here.
XColorMode | MinorGridColorMode | x-Axis Minor Grid Color |
---|---|---|
'auto' | 'auto' | MinorGridColor property |
'manual' | MinorGridColor property | |
'manual' | 'auto' | XColor property |
'manual' | MinorGridColor property |
YColorMode
— Property for setting y-axis grid color
'auto'
(default) | 'manual'
Property for setting the y-axis grid color, specified
as 'auto'
or 'manual'
. The mode value
only affects the y-axis grid color. The
y-axis line, tick values, and labels always use the
YColor
value, regardless of the mode.
The y-axis grid color depends on both the
YColorMode
property and the
GridColorMode
property, as shown
here.
YColorMode | GridColorMode | y-Axis Grid Color |
---|---|---|
'auto' | 'auto' | GridColor property |
'manual' | GridColor property | |
'manual' | 'auto' | YColor property |
'manual' | GridColor property |
The y-axis minor grid color depends on both the
YColorMode
property and the
MinorGridColorMode
property, as shown
here.
YColorMode | MinorGridColorMode | y-Axis Minor Grid Color |
---|---|---|
'auto' | 'auto' | MinorGridColor property |
'manual' | MinorGridColor property | |
'manual' | 'auto' | YColor property |
'manual' | MinorGridColor property |
ZColorMode
— Property for setting z-axis grid color
'auto'
(default) | 'manual'
Property for setting the z-axis grid color, specified
as 'auto'
or 'manual'
. The mode value
only affects the z-axis grid color. The
z-axis line, tick values, and labels always use the
ZColor
value, regardless of the mode.
The z-axis grid color depends on both the
ZColorMode
property and the
GridColorMode
property, as shown
here.
ZColorMode | GridColorMode | z-Axis Grid Color |
---|---|---|
'auto' | 'auto' | GridColor property |
'manual' | GridColor property | |
'manual' | 'auto' | ZColor property |
'manual' | GridColor property |
The z-axis minor grid color depends on both the
ZColorMode
property and the
MinorGridColorMode
property, as shown
here.
ZColorMode | MinorGridColorMode | z-Axis Minor Grid Color |
---|---|---|
'auto' | 'auto' | MinorGridColor property |
'manual' | MinorGridColor property | |
'manual' | 'auto' | ZColor property |
'manual' | MinorGridColor property |
XDir
— x-axis direction
'normal'
(default) | 'reverse'
x-axis direction, specified as one of these values.
Value | Description | Result in 2-D | Result in 3-D |
---|---|---|---|
'normal' | Values increase from left to right. Example:
| ||
'reverse' | Values increase from right to left. Example:
|
YDir
— y-axis direction
'normal'
(default) | 'reverse'
y-axis direction, specified as one of these values.
Value | Description | Result in 2-D | Result in 3-D |
---|---|---|---|
'normal' | Values increase from bottom to top (2-D view) or front to back (3-D view). Example:
| ||
'reverse' | Values increase from top to bottom (2-D view) or back to front (3-D view). Example:
|
ZDir
— z-axis direction
'normal'
(default) | 'reverse'
z-axis direction, specified as one of these values.
Value | Description | Result in 3-D |
---|---|---|
'normal' | Values increase pointing out of the screen (2-D view) or from bottom to top (3-D view). Example:
| |
'reverse' | Values increase pointing into the screen (2-D view) or from top to bottom (3-D view). Example:
|
XScale
, YScale
, ZScale
— Scale of values along axis
'linear'
(default) | 'log'
Axis scale, specified as one of these values.
Value | Description | Result |
---|---|---|
'linear' | Linear scale Example:
| |
'log' | Log scale Example:
Note The axes might exclude coordinates in some cases:
|
Grids
XGrid
, YGrid
, ZGrid
— Grid lines
'off'
(default) | on/off logical value
Grid lines, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A value of 'on'
is
equivalent to true
, and 'off'
is
equivalent to false
. Thus, you can use the value of this
property as a logical value. The value is stored as an on/off logical value
of type matlab.lang.OnOffSwitchState
.
'on'
— Display grid lines perpendicular to the axis; for example, along lines of constant x, y, or z values.'off'
— Do not display the grid lines.
Alternatively, use the grid on
or grid
off
command to set all three properties to
'on'
or 'off'
, respectively. For
more information, see grid
.
Example: ax.XGrid = 'on'
Layer
— Placement of grid lines and tick marks
'bottom'
(default) | 'top'
Placement of grid lines and tick marks in relation to graphic objects, specified as one of these values:
'bottom'
— Display tick marks and grid lines under graphics objects.'top'
— Display tick marks and grid lines over graphics objects.
This property affects only 2-D views.
Example: ax.Layer = 'top'
GridLineStyle
— Line style for grid lines
'-'
(default) | '--'
| ':'
| '-.'
| 'none'
Line style for grid lines, specified as one of the line styles in this table.
Line Style | Description | Resulting Line |
---|---|---|
"-" | Solid line |
|
"--" | Dashed line |
|
":" | Dotted line |
|
"-." | Dash-dotted line |
|
"none" | No line | No line |
To display the grid lines, use the grid on
command or
set the XGrid
, YGrid
, or
ZGrid
property to 'on'
.
Example: ax.GridLineStyle = '--'
GridLineWidth
— Grid line width
0.5
(default) | positive number
Since R2023a
Grid line width, specified as a positive number. Set this property or the MinorGridLineWidth
property to control the thickness of the grid lines independently of the box outline and tick marks.
Example
Create vectors x
and y
, and plot them. Display the grid
lines in the axes by calling grid on
. Increase the thickness of
the grid lines, box outline, and tick marks by setting the
LineWidth
property of the axes to
1.5
.
x = linspace(0,10);
y = sin(x);
plot(x,y)
grid on
ax = gca;
ax.LineWidth = 1.5;
Make the grid lines thinner by setting the grid line width to 0.5
.
ax.GridLineWidth = 0.5;
GridLineWidthMode
— How grid line width is set
"auto"
(default) | "manual"
Since R2023a
How the grid line width is set, specified as one of these values:
"auto"
— Set theGridLineWidth
property to the same value as theLineWidth
property."manual"
— Hold the current value of theGridLineWidth
property.
MATLAB sets this property to "manual"
when you explicitly set
the GridLineWidth
property to a value.
GridColor
— Color of grid lines
[0.15 0.15 0.15]
(default) | RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Color of grid lines, specified as an RGB triplet, a hexadecimal color code, a color name, or a short name.
For a custom color, specify an RGB triplet or a hexadecimal color code.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
, for example,[0.4 0.6 0.7]
.A hexadecimal color code is a string scalar or character vector that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Therefore, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" | |
"none" | Not applicable | Not applicable | Not applicable | No color |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
To set the colors for the axes box outline, use the
XColor
, YColor
, and
ZColor
properties.
To display the grid lines, use the grid on
command or
set the XGrid
, YGrid
, or
ZGrid
property to 'on'
.
Example: ax.GridColor = [0 0 1]
Example: ax.GridColor = 'blue'
Example: ax.GridColor = '#0000FF'
GridColorMode
— Property for setting grid color
'auto'
(default) | 'manual'
Property for setting the grid color, specified as one of these values:
'auto'
— Check the values of theXColorMode
,YColorMode
, andZColorMode
properties to determine the grid line colors for the x, y, and z directions.'manual'
— UseGridColor
to set the grid line color for all directions.
GridAlpha
— Grid-line transparency
0.15
(default) | value in the range [0,1]
Grid-line transparency, specified as a value in the range [0,1]
.
A value of 1
means opaque and a value of 0
means
completely transparent.
Example: ax.GridAlpha = 0.5
GridAlphaMode
— Selection mode for GridAlpha
'auto'
(default) | 'manual'
Selection mode for the GridAlpha
property,
specified as one of these values:
'auto'
— Default transparency value of0.15
.'manual'
— Manually specify the transparency value. To specify the value, set theGridAlpha
property.
Example: ax.GridAlphaMode = 'auto'
XMinorGrid
, YMinorGrid
, ZMinorGrid
— Minor grid lines
'off'
(default) | on/off logical value
Minor grid lines, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A value of 'on'
is
equivalent to true
, and 'off'
is
equivalent to false
. Thus, you can use the value of this
property as a logical value. The value is stored as an on/off logical value
of type matlab.lang.OnOffSwitchState
.
'on'
— Display grid lines aligned with the minor tick marks of the axis. You do not need to enable minor ticks to display minor grid lines.'off'
— Do not display grid lines.
Alternatively, use the grid minor
command to toggle the
visibility of the minor grid lines.
Example: ax.XMinorGrid = 'on'
MinorGridLineStyle
— Line style for minor grid lines
':'
(default) | '-'
| '--'
| '-.'
| 'none'
Line style for minor grid lines, specified as one of the line styles shown in this table.
Line Style | Description | Resulting Line |
---|---|---|
"-" | Solid line |
|
"--" | Dashed line |
|
":" | Dotted line |
|
"-." | Dash-dotted line |
|
"none" | No line | No line |
To display minor grid lines, use the grid minor
command
or set the XMinorGrid
, YMinorGrid
,
or ZMinorGrid
property to
'on'
.
Example: ax.MinorGridLineStyle = '-.'
MinorGridLineWidth
— Minor grid line width
0.5
(default) | positive number
Since R2023a
Minor grid line width, specified as a positive number. Set this
property or the GridLineWidth
property to control the thickness of the grid lines
independently of the box outline and tick marks.
Tip
To see the minor grid lines, set the
XMinorGrid
,YMinorGrid
, orZMinorGrid
properties to"on"
.When you set the
GridLineWidth
property, MATLAB also sets theMinorGridLineWidth
property to the same value. To avoid changing theMinorGridLineWidth
property, set theMinorGridLineWidthMode
property to"manual"
before setting theGridLineWidth
property.
MinorGridLineWidthMode
— How minor grid line width is set
"auto"
(default) | "manual"
Since R2023a
How the minor grid line width is set, specified as one of these values:
"auto"
— Set theMinorGridLineWidth
property to the same value as theGridLineWidth
property."manual"
— Hold the current value of theMinorGridLineWidth
property.
MATLAB sets this property to "manual"
when you explicitly set
the MinorGridLineWidth
property to a value.
MinorGridColor
— Color of minor grid lines
[0.1 0.1 0.1]
(default) | RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Color of minor grid lines, specified as an RGB triplet, a hexadecimal color code, a color name, or a short name.
For a custom color, specify an RGB triplet or a hexadecimal color code.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
, for example,[0.4 0.6 0.7]
.A hexadecimal color code is a string scalar or character vector that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Therefore, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" | |
"none" | Not applicable | Not applicable | Not applicable | No color |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
To display minor grid lines, use the grid minor
command
or set the XMinorGrid
, YMinorGrid
,
or ZMinorGrid
property to
'on'
.
Example: ax.MinorGridColor = [0 0 1]
Example: ax.MinorGridColor = 'blue'
Example: ax.MinorGridColor = '#0000FF'
MinorGridColorMode
— Property for setting minor grid color
'auto'
(default) | 'manual'
Property for setting the minor grid color, specified as one of these values:
'auto'
— Check the values of theXColorMode
,YColorMode
, andZColorMode
properties to determine the grid line colors for the x, y, and z directions.'manual'
— UseMinorGridColor
to set the minor grid line color for all directions.
MinorGridAlpha
— Minor grid line transparency
0.25
(default) | value in the range [0,1]
Minor grid line transparency, specified as a value in the range [0,1]
.
A value of 1
means opaque and a value of 0
means
completely transparent.
Example: ax.MinorGridAlpha = 0.5
MinorGridAlphaMode
— Selection mode for MinorGridAlpha
'auto'
(default) | 'manual'
Selection mode for the MinorGridAlpha
property,
specified as one of these values:
'auto'
— Default transparency value of0.25
.'manual'
— Manually specify the transparency value. To specify the value, set theMinorGridAlpha
property.
Example: ax.MinorGridAlphaMode = 'auto'
Labels
Title
— Text object for axes title
text object
Text object for axes title. To add a title, set the
String
property of the text object. To change the
title appearance, such as the font style or color, set other properties. For
a complete list, see Text Properties.
ax = uiaxes; ax.Title.String = 'My Graph Title'; ax.Title.FontWeight = 'normal';
Alternatively, use the title
function to add a
title and control the
appearance.
title(ax,'My Title','FontWeight','normal')
Subtitle
— Text object for subtitle
text object
Text object for the axes subtitle. To add a subtitle, set the
String
property of the text object. To change its
appearance, such as the font angle, set other properties. For a complete
list, see Text Properties.
ax = uiaxes; ax.Subtitle.String = 'An Insightful Subtitle'; ax.Subtitle.FontAngle = 'italic';
Alternatively, use either the subtitle
function or the title
function to add a
subtitle and control the
appearance.
% subtitle function subtitle(ax,'Insightful Subtitle','FontAngle','italic') % title function [t,s] = title(ax,'Clever Title','Insightful Subtitle'); s.FontAngle = 'italic';
Note
This text object is not contained in the Children
property of the UIAxes
object. It cannot be returned
by findobj
, and it does not
use the default values defined for text objects.
TitleHorizontalAlignment
— Title and subtitle horizontal alignment
'center'
(default) | 'left'
| 'right'
Title and subtitle horizontal alignment with the plot box, specified as one of the values from the table.
TitleHorizontalAlignment Value | Description | Appearance |
---|---|---|
'center' | The title and subtitle are centered over the plot box. |
|
'left' | The title and subtitle are aligned with the left side of the plot box. |
|
'right' | The title and subtitle are aligned with the right side of the plot box. |
|
XLabel
, YLabel
, ZLabel
— Text object for axis label
text object
Text object for axis label. To add an axis label, set the
String
property of the text object. To change the
label appearance, such as the font size, set other properties. For a
complete list, see Text Properties.
ax = uiaxes;
ax.YLabel.String = 'y-Axis Label';
ax.YLabel.FontSize = 12;
Alternatively, use the xlabel
, ylabel
, and zlabel
functions to add an
axis label and control the
appearance.
ylabel(ax,'My y-Axis Label','FontSize',12)
Legend
— Legend associated with axes
empty GraphicsPlaceholder
(default) | Legend
object
This property is read-only.
Legend associated with the UIAxes
object, specified as a
Legend
object. To add a legend to the axes, use the
legend
function. Then, you
can use this property to modify the legend. For a complete list of
properties, see Legend Properties.
ax = uiaxes;
ax.Legend.TextColor = 'red';
You also can use this property to determine if the axes has a legend.
ax = uiaxes; lgd = ax.Legend if ~isempty(lgd) disp('Legend Exists') end
Multiple Plots
ColorOrder
— Color order
seven predefined colors (default) | three-column matrix of RGB triplets
Color order, specified as a three-column matrix of RGB triplets. This property defines
the palette of colors MATLAB uses to create plot objects such as Line
,
Scatter
, and Bar
objects. Each row of the
array is an RGB triplet. An RGB triplet is a three-element vector whose elements specify
the intensities of the red, green, and blue components of a color. The intensities must
be in the range [0, 1]. This table lists the default colors.
This table lists the default colors.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
MATLAB assigns colors to objects according to their order of creation. For example, when plotting lines, the first line uses the first color, the second line uses the second color, and so on. If there are more lines than colors, then the cycle repeats.
Changing the Color Order Before or After Plotting
You can change the color order in either of the following ways:
Call the
colororder
function to change the color order for all the axes in a figure. The colors of existing plots in the figure update immediately. If you place additional axes into the figure, those axes also use the new color order. If you continue to call plotting commands, those commands also use the new colors.Set the
ColorOrder
property on the axes, call thehold
function to set the axes hold state to'on'
, and then call the desired plotting functions. This is like calling thecolororder
function, but in this case you are setting the color order for the specific axes, not the entire figure. Setting thehold
state to'on'
is necessary to ensure that subsequent plotting commands do not reset the axes to use the default color order.
ColorOrderIndex
— Color order index
1
(default) | positive integer
Color order index, specified as a positive integer. This property specifies the next
color MATLAB selects from the axes ColorOrder
property when
it creates the next plot object such as a Line
,
Scatter
, or Bar
object.
Note
Setting the SeriesIndex
property of individual plot objects
is recommended over setting the ColorOrderIndex
property of the
axes. The behavior of the ColorOrderIndex
property changed in
R2019b. For more information, see Indexing scheme for ColorOrder and LineStyleOrder might change plot colors and line styles.
LineStyleOrder
— Line style order
"-"
solid line (default) | character vector | cell array of character vectors | string array
Line style order, specified as a character vector, a cell array of character vectors,
or a string array. This property lists the line styles that MATLAB uses to display multiple plot lines in the axes. MATLAB assigns styles to lines according to their order of creation. By default,
it changes to the next line style only after cycling through all the colors in the
ColorOrder
property with
the current line style. Set the LineStyleCyclingMethod
property to "withcolor"
to cycle through both together or to
"beforecolor"
to cycle through the line styles first. The default
LineStyleOrder
has only one line style,
"-"
.
To customize the line style order, create a cell array of character vectors or a
string array. Specify each element of the array as a line specifier or marker specifier
from the following tables. You can combine a line and a marker specifier into a single
element, such as "-*"
.
Line Style | Description | Resulting Line |
---|---|---|
"-" | Solid line |
|
"--" | Dashed line |
|
":" | Dotted line |
|
"-." | Dash-dotted line |
|
Marker | Description | Resulting Marker |
---|---|---|
"o" | Circle |
|
"+" | Plus sign |
|
"*" | Asterisk |
|
"." | Point |
|
"x" | Cross |
|
"_" | Horizontal line |
|
"|" | Vertical line |
|
"square" | Square |
|
"diamond" | Diamond |
|
"^" | Upward-pointing triangle |
|
"v" | Downward-pointing triangle |
|
">" | Right-pointing triangle |
|
"<" | Left-pointing triangle |
|
"pentagram" | Pentagram |
|
"hexagram" | Hexagram |
|
Changing Line Style Order Before or After Plotting
You can change the line style order before or after plotting into the axes. When
you set the LineStyleOrder
property to a new value, MATLAB updates the styles of any lines that are in the axes. If you continue
plotting into the axes, your plotting commands continue using the line styles from
the updated list.
You must change the line style order before
plotting. Set the value of the LineStyleOrder
property, and
then call the hold
function to set the axes hold
state to "on"
before calling any plotting functions. For more
information, see Changing ColorOrder or LineStyleOrder affects existing plots immediately and
Indexing scheme for ColorOrder and LineStyleOrder might change plot colors and line styles.
LineStyleCyclingMethod
— How to cycle through line styles
"aftercolor"
(default) | "beforecolor"
| "withcolor"
Since R2023a
How to cycle through the line styles when there are multiple lines in the axes, specified as one of the values from this table.
The examples in this table were created using the default colors in the
ColorOrder
property and three line styles
(["-","-o","--"]
) in the LineStyleOrder
property.
Value | Description | Example |
---|---|---|
| Cycle through the line styles of the |
|
"beforecolor" | Cycle through the line styles of the
|
|
"withcolor" | Cycle through the line styles of the
|
|
NextSeriesIndex
— SeriesIndex
value for next object
whole number
This property is read-only.
SeriesIndex
value for the next plot object added to the axes,
returned as a whole number greater than or equal to 0
. This property
is useful when you want to track how the objects cycle through the colors and line
styles. This property maintains a count of the objects in the axes that have a numeric
SeriesIndex
property value. MATLAB uses it to assign a SeriesIndex
value to each new
object. The count starts at 1
when you create the axes, and it
increases by 1
for each additional object. Thus, the count is
typically n+1, where n is the number of objects in
the axes.
If you manually change the ColorOrderIndex
or
LineStyleOrderIndex
property on the axes, the value of the
NextSeriesIndex
property changes to 0
. As a
consequence, objects that have a SeriesIndex
property no longer
update automatically when you change the ColorOrder
or
LineStyleOrder
properties on the axes.
NextPlot
— Properties to reset
'replacechildren'
(default) | 'add'
| 'replaceall'
| 'replace'
Properties to reset when adding a new plot to the axes, specified as one of these values:
'add'
— Add new plots to the existing axes. Do not delete existing plots or reset axes properties before displaying the new plot.'replacechildren'
— Delete existing plots before displaying the new plot. Reset theColorOrderIndex
andLineStyleOrderIndex
properties to1
, but do not reset other axes properties. The next plot added to the axes uses the first color and line style based on theColorOrder
andLineStyle
order properties. This value is similar to usingcla
before every new plot.'replace'
— Delete existing plots and reset axes properties, exceptPosition
andUnits
, to their default values before displaying the new plot.'replaceall'
— Delete existing plots and reset axes properties, exceptPosition
andUnits
, to their default values before displaying the new plot. This value is similar to usingcla reset
before every new plot.
Note
For
UIAxes
objects with only one y-axis, the'replace'
and'replaceall'
property values are equivalent. ForAxes
objects with two y-axes, the'replace'
value affects only the active side while the'replaceall'
value affects both sides.Passing a
UIAxes
object to thecla
function with the'reset'
option sets theNextPlot
property to'replace'
unless you define a different default for theNextPlot
property.
Figures created with the uifigure
function also have
a NextPlot
property. Alternatively, you can use the
newplot
function to
prepare figures and axes for subsequent graphics commands.
SortMethod
— Order for rendering objects
'depth'
| 'childorder'
Order for rendering objects, specified as one of these values:
'depth'
— Draw objects in back-to-front order based on the current view. Use this value to ensure that objects in front of other objects are drawn correctly.'childorder'
— Draw objects in the order in which they are created by graphics functions, without considering the relationship of the objects in three dimensions. This value can result in faster rendering, particularly if the figure is very large, but also can result in improper depth sorting of the objects displayed.
LineStyleOrderIndex
— Line style order index
1
(default) | positive integer
Line style order index, specified as a positive integer. This property specifies the
next line style MATLAB selects from the axes LineStyleOrder
property
to create the next plot line.
Note
Setting the SeriesIndex
property of individual plot objects
is recommended over setting the LineStyleOrderIndex
property of
the axes. The behavior of the LineStyleOrderIndex
property
changed in R2019b. For more information, see Indexing scheme for ColorOrder and LineStyleOrder might change plot colors and line styles.
Color and Transparency Maps
Colormap
— Color map
parula (default) | m
-by-3
array of RGB triplets
Color map, specified as an m
-by-3
array of RGB (red, green, blue) triplets that define m
individual colors.
Example: ax.Colormap = [1 0 1; 0 0 1; 1 1 0]
sets the color map to three colors: magenta, blue, and yellow.
MATLAB accesses these colors by their row number.
Alternatively, use the colormap
function to change the color map.
ColorScale
— Scale for color mapping
'linear'
(default) | 'log'
Scale for color mapping, specified as one of these values:
'linear'
— Linear scale. The tick values along the colorbar also use a linear scale.'log'
— Log scale. The tick values along the colorbar also use a log scale.
CLim
— Color limits
[0 1]
(default) | two-element vector of the form [cmin cmax]
Color limits for objects in axes that use the colormap, specified as a
two-element vector of the form [cmin cmax]
. This property
determines how data values map to the colors in the colormap where:
cmin
specifies the data value that maps to the first color in the colormap.cmax
specifies the data value that maps to the last color in the colormap.
The Axes
object interpolates data values
between cmin
and cmax
across the
colormap. Values outside this range use either the first or last color,
whichever is closest.
CLimMode
— Selection mode for CLim
'auto'
(default) | 'manual'
Selection mode for the CLim
property, specified
as one of these values:
'auto'
— Automatically select the limits based on the color data of the graphics objects contained in the axes.'manual'
— Manually specify the values. To specify the values, set theCLim
property. The values do not change when the limits of the axes children change.
Alphamap
— Transparency map
array of 64 values from 0
to 1
(default) | array of finite alpha values from 0
to 1
Transparency map, specified as an array of finite alpha values that progress linearly from
0
to 1
. The size of the array can be
m-by-1 or 1-by-m. MATLAB accesses alpha values by their index in the array. An alphamap can be any
length.
AlphaScale
— Scale for transparency mapping
'linear'
(default) | 'log'
Scale for transparency mapping, specified as one of these values:
'linear'
— Linear scale'log'
— Log scale
ALim
— Alpha limits
[0 1]
(default) | two-element vector of the form [amin amax]
Alpha limits, specified as a two-element vector of the form [amin
amax]
. This property affects the
AlphaData
values of graphics objects, such as
surface, image, and patch objects. This property determines how the
AlphaData
values map to the figure alpha map,
where:
amin
specifies the data value that maps to the first alpha value in the figure alpha map.amax
specifies the data value that maps to the last alpha value in the figure alpha map.
The UIAxes
object interpolates data values between
amin
and amax
across the figure
alpha map. Values outside this range use either the first or last alpha map
value, whichever is closest.
The Alphamap
property
of the figure contains the alpha map. For more information, see the
alpha
function.
ALimMode
— Selection mode for ALim
'auto'
(default) | 'manual'
Selection mode for the ALim
property, specified
as one of these values:
'auto'
— Automatically select the limits based on theAlphaData
values of the graphics objects contained in the axes.'manual'
— Manually specify the alpha limits. To specify the alpha limits, set theALim
property.
Box Styling
Color
— Color of plot area
[1 1 1]
(default) | RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Color of plot area, specified as an RGB triplet, a hexadecimal color code,
a color name, or a short name. The color affects the area defined by the
InnerPosition
property value.
For a custom color, specify an RGB triplet or a hexadecimal color code.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
, for example,[0.4 0.6 0.7]
.A hexadecimal color code is a string scalar or character vector that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Therefore, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" | |
"none" | Not applicable | Not applicable | Not applicable | No color |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
Example: ax.Color = [0 0 1]
Example: ax.Color = 'blue'
Example: ax.Color = '#0000FF'
BackgroundColor
— Color of margin around plot area
'none'
Color of margin around plot area, returned as 'none'
.
Note
Setting this property has no effect.
LineWidth
— Line width
0.5
(default) | positive numeric value
Line width of axes outline, tick marks, and grid lines, specified as a positive numeric value in point units. One point equals 1/72 inch.
Example: ax.LineWidth = 1.5
Box
— Box outline
'off'
(default) | on/off logical value
Box outline, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A value of 'on'
is
equivalent to true
, and 'off'
is
equivalent to false
. Thus, you can use the value of this
property as a logical value. The value is stored as an on/off logical value
of type matlab.lang.OnOffSwitchState
.
Value | Description | 2-D Result | 3-D Result |
---|---|---|---|
'on' | Display the box outline around the axes. For
3-D views, use the Example:
| ||
'off' | Do not display the box outline around the axes. Example:
|
The XColor
,
YColor
, and ZColor
properties
control the color of the outline.
Example: ax.Box = 'on'
BoxStyle
— Box outline style
'back'
(default) | 'full'
Box outline style, specified as 'back'
or
'full'
. This property affects only 3-D views.
Value | Description | Result |
---|---|---|
'back' | Outline the back planes of the 3-D box. Example:
| |
'full' | Outline the entire 3-D box. Example:
|
Clipping
— Clipping of objects to axes limits
'on'
(default) | on/off logical value
Clipping of objects to the axes limits, specified as
'on'
or 'off'
, or as numeric or
logical 1
(true
) or
0
(false
). A value of
'on'
is equivalent to true
, and
'off'
is equivalent to false
.
Thus, you can use the value of this property as a logical value. The value
is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
The clipping behavior of an object within the Axes
object depends on both the Clipping
property of the Axes
object and the
Clipping
property of the individual object. The
property value of the Axes
object has
these effects:
'on'
— Enable each individual object within the axes to control its own clipping behavior based on theClipping
property value for the object.'off'
— Disable clipping for all objects within the axes, regardless of theClipping
property value for the individual objects. Parts of objects can appear outside of the axes limits. For example, parts can appear outside the limits if you create a plot, use thehold on
command, freeze the axis scaling, and then add a plot that is larger than the original plot.
This table lists the results for different combinations of
Clipping
property values.
Clipping Property for Axes Object | Clipping Property for Individual Object | Result |
---|---|---|
'on' | 'on' | Individual object is clipped. Others might or might not be. |
'on' | 'off' | Individual object is not clipped. Others might or might not be. |
'off' | 'on' | All objects are unclipped. |
'off' | 'off' | All objects are unclipped. |
ClippingStyle
— Clipping boundaries
'3dbox'
(default) | 'rectangle'
Clipping boundaries, specified as one of the values in this table. If a plot contains markers, then as long as the data point lies within the axes limits, MATLAB draws the entire marker.
The ClippingStyle
property has no effect if the
Clipping
property is set to
'off'
.
Value | Descriptions | Illustration of Boundary Region |
---|---|---|
'3dbox' | Clip plotted objects to the six sides of the axes box defined by the axis limits. Thick lines might display outside the axes limits. |
|
'rectangle' | Clip plotted objects to a rectangular boundary enclosing the axes in any given view. Clip thick lines at the axes limits. |
|
AmbientLightColor
— Background light color
[1 1 1]
(default) | RGB triplet | hexadecimal color code | 'r'
| 'g'
| 'b'
| ...
Background light color, specified as an RGB triplet, a hexadecimal color
code, a color name, or a short name. The background light is a directionless
light that shines uniformly on all objects in the axes. To add light, use
the light
function.
For a custom color, specify an RGB triplet or a hexadecimal color code.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
, for example,[0.4 0.6 0.7]
.A hexadecimal color code is a string scalar or character vector that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Therefore, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name | Short Name | RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|---|---|
"red" | "r" | [1 0 0] | "#FF0000" | |
"green" | "g" | [0 1 0] | "#00FF00" | |
"blue" | "b" | [0 0 1] | "#0000FF" | |
"cyan"
| "c" | [0 1 1] | "#00FFFF" | |
"magenta" | "m" | [1 0 1] | "#FF00FF" | |
"yellow" | "y" | [1 1 0] | "#FFFF00" | |
"black" | "k" | [0 0 0] | "#000000" | |
"white" | "w" | [1 1 1] | "#FFFFFF" | |
"none" | Not applicable | Not applicable | Not applicable | No color |
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet | Hexadecimal Color Code | Appearance |
---|---|---|
[0 0.4470 0.7410] | "#0072BD" | |
[0.8500 0.3250 0.0980] | "#D95319" | |
[0.9290 0.6940 0.1250] | "#EDB120" | |
[0.4940 0.1840 0.5560] | "#7E2F8E" | |
[0.4660 0.6740 0.1880] | "#77AC30" | |
[0.3010 0.7450 0.9330] | "#4DBEEE" | |
[0.6350 0.0780 0.1840] | "#A2142F" |
Example: ax.AmbientLightColor = [1 0 1]
Example: ax.AmbientLightColor = 'magenta'
Example: ax.AmbientLightColor = '#FF00FF'
Position
Position
— Size and location of axes, including labels and margins
[10 10 400 300]
(default) | four-element vector
Size and location of axes, including the labels and margins, specified as a four-element
vector of the form [left bottom width height]
. This property is
equivalent to the OuterPosition
property. The vector defines a
rectangle that encloses the outer bounds of the axes. The values are measured in the
units specified by the Units
property, which defaults to pixels.
The
left
andbottom
elements define the position of the rectangle, measured from the lower left corner of the parent container.The
width
andheight
define the size of the rectangle.
If you want to specify the position and account for the text around the axes, then set
the either the Position
or the OuterPosition
property. These figures show the areas defined by the Position
(or
OuterPosition
) in blue, and the
InnerPosition
in red.
2-D View of Axes | 3-D View of Axes |
---|---|
|
|
Note
Setting this property has no effect when the parent container is a
TiledChartLayout
object.
InnerPosition
— Size and location of inner axes, excluding labels and margins
[31.75 29.73 369.24 272.27]
(default) | four-element vector
Inner size and location, excluding labels and margins, specified as a
four-element vector of the form [left bottom width
height]
. The values are measured in the units specified by the
Units
property, which defaults to pixels.
The
left
andbottom
elements define the position of the rectangle, measured from the lower left corner of the parent container.The
width
andheight
define the size of the rectangle.
If you want to specify the position and account for the text around the
axes, then set the either the Position
or the
OuterPosition
property. These figures show the
areas defined by the Position
(or
OuterPosition
) in blue, and the
InnerPosition
in red.
2-D View of Axes | 3-D View of Axes |
---|---|
|
|
MATLAB automatically sets InnerPosition
to the
largest possible values that conform to all other properties. Other UIAxes
properties that affect the axes size and
shape include Position
,
DataAspectRatio
and
PlotBoxAspectRatio
.
Note
When querying the inner position of axes with constrained aspect ratios (such square axes or those containing images) consider using the
tightPosition
function for more accuracy. (since R2022b)Setting this property has no effect when the parent container is a
TiledChartLayout
OuterPosition
— Size and location of axes, including labels and margins
[10 10 400 300]
(default) | four-element vector
Size and location of the axes, including the labels and margins, specified
as a four-element vector of the form [left bottom width
height]
.
This property value is identical to the Position
property value.
TightInset
— Margin for text labels
four-element vector of the form [left bottom right
top]
This property is read-only.
Margin for text labels, returned as a four-element vector of the form
[left bottom right top]
. The elements define the
distances between the bounds of the InnerPosition
property and the extent of the axes text labels and title. By default, the
values are measured in pixels. To change the units, set the
Units
property.
PositionConstraint
— Position to hold constant
"outerposition"
| "innerposition"
Position property to hold constant when adding, removing, or changing decorations, specified as one of the following values:
"outerposition"
— TheOuterPosition
property remains constant when you add, remove, or change decorations such as a title or an axis label. If any positional adjustments are needed, MATLAB adjusts theInnerPosition
property."innerposition"
— TheInnerPosition
property remains constant when you add, remove, or change decorations such as a title or an axis label. If any positional adjustments are needed, MATLAB adjusts theOuterPosition
property.
Note
Setting this property has no effect when the parent container is a
TiledChartLayout
object.
Units
— Position units
'pixels'
(default) | 'normalized'
| 'inches'
| 'centimeters'
| 'points'
| 'characters'
Position units, specified as one of these values.
Units | Description |
---|---|
'normalized' | Normalized with respect to the container, which is
typically the figure or a panel. The lower left corner
of the container maps to (0,0) and
the upper right corner maps to
(1,1) . |
'inches' | Inches. |
'centimeters' | Centimeters. |
'characters' | Based on the default uicontrol font of the graphics root object:
|
'points' | Typography points. One point equals 1/72 inch. |
'pixels' |
|
When specifying the units as a Name,Value
pair during
object creation, you must set the Units
property before
specifying the properties that you want to use these units, such as
Position
.
DataAspectRatio
— Relative length of data units
[1 1 1]
(default) | three-element vector of the form [dx dy dz]
Relative length of data units along each axis, specified as a
three-element vector of the form [dx dy dz]
. This vector
defines the relative x, y, and
z data scale factors. For example, specifying this
property as [1 2 1]
sets the length of one unit of data
in the x-direction to be the same length as two units of
data in the y-direction and one unit of data in the
z-direction.
Alternatively, use the daspect
function to change
the data aspect ratio.
Example: ax.DataAspectRatio = [1 1 1]
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
DataAspectRatioMode
— Data aspect ratio mode
'auto'
(default) | 'manual'
Data aspect ratio mode, specified as one of these values:
'auto'
— Automatically select values that make best use of the available space. IfPlotBoxAspectRatioMode
andCameraViewAngleMode
are also set to'auto'
, then enable "stretch-to-fill" behavior. Stretch the axes so that it fills the available space as defined by thePosition
property.'manual'
— Disable the "stretch-to-fill" behavior and use the manually specified data aspect ratio. To specify the values, set theDataAspectRatio
property.
PlotBoxAspectRatio
— Relative length of each axis
three-element vector of the form [px py pz]
Relative length of each axis, specified as a three-element vector of the
form [px py pz]
defining the relative
x-axis, y-axis, and
z-axis scale factors. The plot box is a box
enclosing the axes data region as defined by the axis limits.
Alternatively, use the pbaspect
function to
change the data aspect ratio.
If you specify the axis limits, data aspect ratio, and plot box aspect ratio, then MATLAB ignores the plot box aspect ratio. It adheres to the axis limits and data aspect ratio.
Example: ax.PlotBoxAspectRatio = [1 0.75
0.75]
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
PlotBoxAspectRatioMode
— Selection mode for PlotBoxAspectRatio
'auto'
(default) | 'manual'
Selection mode for the PlotBoxAspectRatio
property,
specified as one of these values:
'auto'
— Automatically select values that make best use of the available space. IfDataAspectRatioMode
andCameraViewAngleMode
also are set to'auto'
, then enable "stretch-to-fill" behavior. Stretch theAxes
object so that it fills the available space as defined by thePosition
property.'manual'
— Disable the "stretch-to-fill" behavior and use the manually specified plot box aspect ratio. To specify the values, set thePlotBoxAspectRatio
property.
Layout
— Layout options
empty LayoutOptions
array (default) | GridLayoutOptions
object | TiledChartLayoutOptions
object
Layout options, specified as a
GridLayoutOptions
or
TiledChartLayoutOptions
object. This property
specifies options when the axes is in a grid layout or a tiled chart layout.
If the axes is not in either type of layout, then this property is empty and
has no effect.
To position the axes in a specific row and column of a grid layout, set
the Row
and Column
properties on
the GridLayoutOptions
object. For example, this code
places the axes in the third row and second column of a grid
layout.
g = uigridlayout([4 3]); ax = uiaxes(g); ax.Layout.Row = 3; ax.Layout.Column = 2;
To make the axes span multiple rows or columns, specify the
Row
or Column
property as a
two-element vector. For example, this axes spans columns
2
through
3
:
ax.Layout.Column = [2 3];
View
View
— Azimuth and elevation of view
[0 90]
(default) | two-element vector of the form [azimuth
elevation]
Azimuth and elevation of view, specified as a two-element vector of the
form [azimuth elevation]
defined in degree units.
Alternatively, use the view
function to set the
view.
Note
Setting the azimuth and elevation angles might reset other camera-related properties. For best results, set the azimuth and elevation angles before setting other camera-related properties.
Example: ax.View = [45 45]
Projection
— Type of projection onto 2-D screen
'orthographic'
(default) | 'perspective'
Type of projection onto a 2-D screen, specified as one of these values:
'orthographic'
— Maintain the correct relative dimensions of graphics objects regarding the distance of a given point from the viewer, and draw lines that are parallel in the data parallel on the screen.'perspective'
— Incorporate foreshortening, which enables you to perceive depth in 2-D representations of 3-D objects. Perspective projection does not preserve the relative dimensions of objects. Instead, it displays a distant line segment smaller than a nearer line segment of the same length. Lines that are parallel in the data might not appear parallel on screen.
CameraPosition
— Camera location
three-element vector of the form [x y z]
Camera location, or the viewpoint, specified as a three-element vector of
the form [x y z]
. This vector defines the axes
coordinates of the camera location, which is the point from which you view
the axes. The camera is oriented along the view axis, which is a straight
line that connects the camera position and the camera target. For an
illustration, see Camera Graphics Terminology.
If the Projection
property is set to 'perspective'
, then as you change the
CameraPosition
setting, the amount of perspective
also changes.
Alternatively, use the campos
function to set the
camera location.
Example: ax.CameraPosition = [0.5 0.5 9]
Data Types: single
| double
CameraPositionMode
— Selection mode for CameraPosition
'auto'
(default) | 'manual'
Selection mode for the CameraPosition
property,
specified as one of these values:
'auto'
— Automatically setCameraPosition
along the view axis. Calculate the position so that the camera lies a fixed distance from the target along the azimuth and elevation specified by the current view, as returned by theview
function. Functions likerotate3d
,zoom
, andpan
, change this mode to'auto'
to perform their actions.'manual'
— Manually specify the value. To specify the value, set theCameraPosition
property.
CameraTarget
— Camera target point
three-element vector of the form [x y z]
Camera target point, specified as a three-element vector of the form
[x y z]
. This vector defines the axes coordinates of
the point. The camera is oriented along the view axis, which is a straight
line that connects the camera position and the camera target. For an
illustration, see Camera Graphics Terminology.
Alternatively, use the camtarget
function to set the
camera target.
Example: ax.CameraTarget = [0.5 0.5 0.5]
Data Types: single
| double
CameraTargetMode
— Selection mode for CameraTarget
'auto'
(default) | 'manual'
Selection mode for the CameraTarget
property,
specified as one of these values:
'auto'
— Position the camera target at the centroid of the axes plot box.'manual'
— Use the manually specified camera target value. To specify a value, set theCameraTarget
property.
CameraUpVector
— Vector defining upwards direction
three-element direction vector of the form [x y
z]
Vector defining upwards direction, specified as a three-element direction
vector of the form [x y z]
. For 2-D views, the default
value is [0 1 0]
. For 3-D views, the default value is
[0 0 1]
. For an illustration, see Camera Graphics Terminology.
Alternatively, use the camup
function to set the
upwards direction.
Example: ax.CameraUpVector = [sin(45) cos(45)
1]
CameraUpVectorMode
— Selection mode for CameraUpVector
'auto'
(default) | 'manual'
Selection mode for the CameraUpVector
property,
specified as one of these values:
'auto'
— Automatically set the value to[0 0 1]
for 3-D views so that the positive z-direction is up. Set the value to[0 1 0]
for 2-D views so that the positive y-direction is up.'manual'
— Manually specify the vector defining the upwards direction. To specify a value, set theCameraUpVector
property.
CameraViewAngle
— Field of view
6.6086
(default) | scalar angle in range [0,180)
Field of view, specified as a scalar angle greater than 0 and less than or equal to 180. Changing the camera view angle affects the size of graphics objects displayed in the axes, but does not affect the degree of perspective distortion. The greater the angle, the larger the field of view and the smaller objects appear in the scene. For an illustration, see Camera Graphics Terminology.
Example: ax.CameraViewAngle = 15
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| logical
CameraViewAngleMode
— Selection mode for CameraViewAngle
'auto'
(default) | 'manual'
Selection mode for the CameraViewAngle
property,
specified as one of these values:
'auto'
— Automatically select the field of view as the minimum angle that captures the entire scene, up to 180 degrees.'manual'
— Manually specify the field of view. To specify a value, set theCameraViewAngle
property.
Interactivity
InteractionOptions
— Options to customize interaction behavior
CartesianAxesInteractionOptions
object
Options to customize interaction behavior, specified as a
CartesianAxesInteractionOptions
object. Use the
properties of the CartesianAxesInteractionOptions
object to
customize the behavior of interactions with the axes. For a complete list of
properties, see CartesianAxesInteractionOptions Properties.
Before R2024a: Specify this property as an
InteractionOptions
object instead of as a
CartesianAxesInteractionOptions
object.
The options set by the CartesianAxesInteractionOptions
object apply to these interactions on the associated axes:
The built-in interactions specified by the
Interactions
property of the axesInteractions enabled by using mode functions, such as
pan
andzoom
Interactions enabled using the axes toolbar
Example: ax.InteractionOptions.LimitsDimensions = "x"
constrains all pan and zoom interactions to the
x-dimension.
Toolbar
— Toolbar with individual interaction buttons
AxesToolbar
object (default) | []
Toolbar with individual interaction buttons, specified as an
AxesToolbar
object or an empty array. Use this property
to customize the appearance and behavior of the toolbar. Create the toolbar
using the axtoolbar
function. The toolbar appears at the top-right
corner of the UI axes when you hover over it.
The toolbar buttons depend on the contents of the UI axes, but typically
include zooming, panning, rotating, brushing, exporting, and restoring the
original view. You can customize the toolbar buttons using the axtoolbar
and axtoolbarbtn
functions.
For a complete list of properties, see AxesToolbar Properties.
To remove the toolbar, set this property to an empty array.
Interactions
— Built-in interactions
array of interaction objects | []
Built-in interactions, specified as an array of interaction objects or an empty array. These interactions are available within your chart through gestures. You do not have to select any axes toolbar buttons to use them.
The default set of built-in interactions depends on the chart type. You can replace the default set with a new set of interactions, but you cannot access or modify the default set of interactions.
To remove all interactions from the axes, set this property to an empty
array. To temporarily disable the current set of interactions, call the
disableDefaultInteractivity
function. You can reenable them
by calling the enableDefaultInteractivity
function.
For a list of interaction objects, see Customize Built-In Interactions.
Example: ax.Interactions = [panInteraction
zoomInteraction]
replaces the default set of built-in
interactions with the panInteraction
and zoomInteraction
objects. This set of interactions enables
dragging to pan within the chart and scrolling to zoom within the
chart.
Visible
— State of visibility
'on'
(default) | on/off logical value
State of visibility, specified as 'on'
or 'off'
, or as numeric or logical 1
(true
) or 0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to false
. Thus, you can use the value of this property as a logical value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Display the axes and its children.'off'
— Hide the axes without deleting it. You still can access the properties of an invisible axes object.
Note
When the Visible
property is 'off'
, the axes
object is invisible, but child objects such as lines remain visible.
CurrentPoint
— Location of mouse pointer
2-by-3 array
Location of mouse pointer, specified as a 2-by-3 array. The
CurrentPoint
property contains the
(x,y,z)
coordinates of the mouse pointer with respect to the axes. The returned
array is of the
form:
[xfront yfront zfront xback yback zback]
The two points indicate the location of the last mouse click. However, if
the figure has a WindowButtonMotionFcn
callback
defined, then the points indicate the last location of the mouse pointer.
The figure also has a CurrentPoint
property.
The values of the current point when using perspective projection can be different from the same point in orthographic projection because the shape of the axes volume can be different.
Orthogonal Projection
When using orthogonal projection, the values depend on whether the click is within the axes or outside the axes.
If the click is inside the axes, the two points lie on the line that is perpendicular to the plane of the screen and that passes through the pointer. The coordinates are the points where this line intersects the front and back surfaces of the axes volume (which is defined by the axes x, y, and z limits). The first row is the point nearest to the camera position. The second row is the point farthest from the camera position. This is true for both 2-D and 3-D views.
If the click is outside the axes, but within the figure, then the points lie on a line that passes through the pointer and is perpendicular to the camera target and camera position planes. The first row is the point in the camera position plane. The second row is the point in the plane of the camera target.
Perspective Projection
Clicking outside of the UIAxes
object in perspective
projection returns the front point as the current camera position. Only
the back point updates with the coordinates of a point that lies on a
line extending from the camera position through the pointer and
intersecting the camera target at that point.
ContextMenu
— Context menu
empty GraphicsPlaceholder
array (default) | ContextMenu
object
Context menu, specified as a ContextMenu
object. Use this property
to display a context menu when you right-click the object. Create the context menu using
the uicontextmenu
function.
Note
If the PickableParts
property is set to
'none'
or if the HitTest
property is set
to 'off'
, then the context menu does not appear.
Selected
— Selection state
'off'
(default) | on/off logical value
Selection state, specified as 'on'
or 'off'
, or as
numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Selected. If you click the object when in plot edit mode, then MATLAB sets itsSelected
property to'on'
. If theSelectionHighlight
property also is set to'on'
, then MATLAB displays selection handles around the object.'off'
— Not selected.
SelectionHighlight
— Display of selection handles
'on'
(default) | on/off logical value
Display of selection handles when selected, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A
value of 'on'
is equivalent to true, and 'off'
is
equivalent to false
. Thus, you can use the value of this property as
a logical value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Display selection handles when theSelected
property is set to'on'
.'off'
— Never display selection handles, even when theSelected
property is set to'on'
.
Callbacks
ButtonDownFcn
— Mouse-click callback
''
(default) | function handle | cell array | character vector
Mouse-click callback, specified as one of these values:
Function handle
Cell array containing a function handle and additional arguments
Character vector that is a valid MATLAB command or function, which is evaluated in the base workspace (not recommended)
Use this property to execute code when you click the object. If you specify this property using a function handle, then MATLAB passes two arguments to the callback function when executing the callback:
Clicked object — Access properties of the clicked object from within the callback function.
Event data — Empty argument. Replace it with the tilde character (
~
) in the function definition to indicate that this argument is not used.
For more information on how to use function handles to define callback functions, see Create Callbacks for Graphics Objects.
Note
If the PickableParts
property is set to 'none'
or
if the HitTest
property is set to 'off'
,
then this callback does not execute.
CreateFcn
— Creation function
''
(default) | function handle | cell array | character vector
Object creation function, specified as one of these values:
Function handle.
Cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
Character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
For more information about specifying a callback as a function handle, cell array, or character vector, see Callbacks in App Designer.
This property specifies a callback function to execute when MATLAB creates the object. MATLAB initializes all property values before executing the CreateFcn
callback. If you do not specify the CreateFcn
property, then MATLAB executes a default creation function.
Setting the CreateFcn
property on an existing component has no effect.
If you specify this property as a function handle or cell array, you can access the object that is being created using the first argument of the callback function. Otherwise, use the gcbo
function to access the object.
DeleteFcn
— Deletion function
''
(default) | function handle | cell array | character vector
Object deletion function, specified as one of these values:
Function handle.
Cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
Character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
For more information about specifying a callback as a function handle, cell array, or character vector, see Callbacks in App Designer.
This property specifies a callback function to execute when MATLAB deletes the object. MATLAB executes the DeleteFcn
callback before destroying the
properties of the object. If you do not specify the DeleteFcn
property, then MATLAB executes a default deletion function.
If you specify this property as a function handle or cell array, you can access the
object that is being deleted using the first argument of the callback function.
Otherwise, use the gcbo
function to access the
object.
Callback Execution Control
Interruptible
— Callback interruption
'on'
(default) | on/off logical value
Callback interruption, specified as 'on'
or 'off'
, or as
numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
This property determines if a running callback can be interrupted. There are two callback states to consider:
The running callback is the currently executing callback.
The interrupting callback is a callback that tries to interrupt the running callback.
MATLAB determines callback interruption behavior whenever it executes a command that
processes the callback queue. These commands include drawnow
, figure
, uifigure
, getframe
, waitfor
, and pause
.
If the running callback does not contain one of these commands, then no interruption occurs. MATLAB first finishes executing the running callback, and later executes the interrupting callback.
If the running callback does contain one of these commands, then the
Interruptible
property of the object that owns the running
callback determines if the interruption occurs:
If the value of
Interruptible
is'off'
, then no interruption occurs. Instead, theBusyAction
property of the object that owns the interrupting callback determines if the interrupting callback is discarded or added to the callback queue.If the value of
Interruptible
is'on'
, then the interruption occurs. The next time MATLAB processes the callback queue, it stops the execution of the running callback and executes the interrupting callback. After the interrupting callback completes, MATLAB then resumes executing the running callback.
Note
Callback interruption and execution behave differently in these situations:
If the interrupting callback is a
DeleteFcn
,CloseRequestFcn
, orSizeChangedFcn
callback, then the interruption occurs regardless of theInterruptible
property value.If the running callback is currently executing the
waitfor
function, then the interruption occurs regardless of theInterruptible
property value.If the interrupting callback is owned by a
Timer
object, then the callback executes according to schedule regardless of theInterruptible
property value.
BusyAction
— Callback queuing
'queue'
(default) | 'cancel'
Callback queuing, specified as 'queue'
or 'cancel'
. The BusyAction
property determines how MATLAB handles the execution of interrupting callbacks. There are two callback states to consider:
The running callback is the currently executing callback.
The interrupting callback is a callback that tries to interrupt the running callback.
The BusyAction
property determines callback queuing behavior only
when both of these conditions are met:
Under these conditions, the BusyAction
property of the
object that owns the interrupting callback determines how MATLAB handles the interrupting callback. These are possible values of the
BusyAction
property:
'queue'
— Puts the interrupting callback in a queue to be processed after the running callback finishes execution.'cancel'
— Does not execute the interrupting callback.
PickableParts
— Ability to capture mouse clicks
'visible'
(default) | 'all'
| 'none'
Ability to capture mouse clicks, specified as one of these values:
'visible'
— Capture mouse clicks only when visible. TheVisible
property must be set to'on'
. TheHitTest
property determines if theUIAxes
object responds to the click or if an ancestor does.'all'
— Capture mouse clicks regardless of visibility. TheVisible
property can be set to'on'
or'off'
. TheHitTest
property determines if theUIAxes
object responds to the click or if an ancestor does.'none'
— Cannot capture mouse clicks. Clicking theUIAxes
object passes the click to the object below it in the current view of the figure window, which is typically the axes or the figure. TheHitTest
property has no effect.
If you want an object to be clickable when it is underneath
other objects that you do not want to be clickable, then set the PickableParts
property
of the other objects to 'none'
so that the click
passes through them.
HitTest
— Response to captured mouse clicks
'on'
(default) | on/off logical value
Response to captured mouse clicks, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A
value of 'on'
is equivalent to true, and 'off'
is
equivalent to false
. Thus, you can use the value of this property as
a logical value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Trigger theButtonDownFcn
callback of theUIAxes
object. If you have defined theContextMenu
property, then invoke the context menu.'off'
— Trigger the callbacks for the nearest ancestor of theUIAxes
object that meets one of these conditions:HitTest
property is set to'on'
.PickableParts
property is set to a value that enables the ancestor to capture mouse clicks.
Note
The PickableParts
property determines if
the UIAxes
object can capture
mouse clicks. If it cannot, then the HitTest
property
has no effect.
BeingDeleted
— Deletion status
on/off logical value
This property is read-only.
Deletion status, returned as an on/off logical value of type matlab.lang.OnOffSwitchState
.
MATLAB sets the BeingDeleted
property to
'on'
when the DeleteFcn
callback begins
execution. The BeingDeleted
property remains set to
'on'
until the component object no longer exists.
Check the value of the BeingDeleted
property to verify that the object is not about to be deleted before querying or modifying it.
Parent/Child
Parent
— Parent container
Figure
object | Panel
object | Tab
object | GridLayout
object | TiledChartLayout
object
Parent container, specified as a Figure
,
Panel
, Tab
, GridLayout
, or TiledChartLayout
object. If
no container is specified, MATLAB calls the uifigure
function to create a
new Figure
object that serves as the
parent container.
Children
— Children
empty GraphicsPlaceholder
array | array of graphics objects
Children, returned as an array of graphics objects. Use this property to view a list of the children or to reorder the children by setting the property to a permutation of itself.
You cannot add or remove children using the Children
property.
To add a child to this list, set the Parent
property
of the child graphics object to the UIAxes
object.
HandleVisibility
— Visibility of object handle
"on"
(default) | "off"
| "callback"
Visibility of the object handle in the Children
property
of the parent, specified as one of these values:
"on"
— Object handle is always visible."off"
— Object handle is invisible at all times. This option is useful for preventing unintended changes by another function. SetHandleVisibility
to"off"
to temporarily hide the handle during the execution of that function."callback"
— Object handle is visible from within callbacks or functions invoked by callbacks, but not from within functions invoked from the command line. This option blocks access to the object at the command line, but permits callback functions to access it.
If the object is not listed in the Children
property of the parent, then
functions that obtain object handles by searching the object hierarchy or querying
handle properties cannot return it. Examples of such functions include the
get
, findobj
, gca
, gcf
, gco
, newplot
, cla
, clf
, and close
functions.
Hidden object handles are still valid. Set the root ShowHiddenHandles
property to "on"
to list all object handles regardless of their
HandleVisibility
property setting.
Identifiers
Type
— Type of graphics object
'axes'
This property is read-only.
Type of graphics object returned as 'axes'
.
Tag
— Object identifier
''
(default) | character vector | string scalar
Object identifier, specified as a character vector or string scalar. You can specify a unique Tag
value to serve as an identifier for an object. When you need access to the object elsewhere in your code, you can use the findobj
function to search for the object based on the Tag
value.
UserData
— User data
[]
(default) | array
User data, specified as any MATLAB array. For example, you can specify a scalar, vector, matrix, cell array, character array, table, or structure. Use this property to store arbitrary data on an object.
If you are working in App Designer, create public or private properties in the app to share data instead of using the UserData
property. For more information, see Share Data Within App Designer Apps.
Version History
Introduced in R2016aR2024a: Specify InteractionOptions
as a
CartesianAxesInteractionOptions
object
The InteractionOptions
object is now called
CartesianAxesInteractionOptions
. The behavior remains the same.
The name of the InteractionOptions
property has not changed.
Starting in R2024a, set the InteractionOptions
property using a
CartesianAxesInteractionOptions
object.
R2023a: Control cycling of line styles using the LineStyleCyclingMethod
property
Use the LineStyleCyclingMethod
property to control how
different lines are distinguished from one another in the axes.
R2023a: Specify grid line thickness using the GridLineWidth
and MinorGridLineWidth
properties
Change the thickness of grid lines independently of the box outline and tick marks
by setting the GridLineWidth
and
MinorGridLineWidth
properties of the axes. Before R2023a,
the LineWidth
property of the axes was the only property for
controlling the grid line width. However, that property controlled the grid lines,
box outline, and tick marks together. Now you can control the thickness of the grid
lines separately.
R2023a: Control behavior of axes interactions using the InteractionOptions
property
Use the InteractionOptions
property to control the behavior
of axes interactions, such as pan, zoom, and rotate.
R2022a: XTickLabelRotationMode
, YTickLabelRotationMode
, and
ZTickLabelRotationMode
properties added
Control the selection mode for tick label rotation by setting the
XTickLabelRotationMode
,
YTickLabelRotationMode
, or
ZTickLabelRotationMode
property.
R2021b: Remove tick marks by setting the TickDir
property to "none"
You can remove all the tick marks from the axes by setting the
TickDir
property to "none"
.
R2021a: Control axis limits with the XLimitMethod
, YLimitMethod
, and ZLimitMethod
properties
Control the axis limits for your plots by setting the
XLimitMethod
, YLimitMethod
, or
ZLimitMethod
on the axes.
R2020b: BackgroundColor
property has no effect
Setting the BackgroundColor
property on a
UIAxes
object no longer has any effect. Starting in R2020b,
the area around the plot box is transparent regardless of the value of the
BackgroundColor
property.
To produce the same effect as setting the background color in previous releases,
create a panel with the desired BackgroundColor
value, and then
place the UIAxes
in the panel.
R2020b: UIAxes
appear behind all other objects
The stacking order (also called the Z-order) of objects in the figure has changed
so that UIAxes
objects and their contents appear behind all UI
components in the figure. This behavior is consistent with the behavior of other
types of axes.
For example, this code creates a figure, a button, and then a
UIAxes
object.
fig = uifigure; b = uibutton(fig); uax = uiaxes(fig);
In R2020a, executing the preceding code displays the UIAxes
in
front of the button, as shown in the figure on the left. The figure on the right
shows the behavior in R2020b, where the UIAxes
appears behind UI
components regardless of the order of creation.
The order of the objects listed in the Children
property of
the figure also reflects this change. The UIAxes
object is always
after UI components in the
list.
fig.Children
ans = 2×1 graphics array: Button (Button) UIAxes
R2020b: Plots might extend outside the bounds of the axes
Plot objects such as lines might not clip to the bounds defined by the
OuterPosition
property of the UIAxes
. The
lines extend beyond the bounds when the Clipping
property of
each line is set to 'off'
. In previous releases, the lines clip
to the OuterPosition
regardless of the value of the
Clipping
property. For example, the plot on the left shows
the R2020a behavior, and the plot on the right shows the R2020b behavior. In both
cases, the Clipping
properties of the lines are set to
'off'
.
To prevent the axes content from overlapping with components in your app, set the
Clipping
property of each object in the axes to
'on'
.
R2020b: UIAxes
SizeChangedFcn
callback has been removed
The SizeChangedFcn
callback for UIAxes
objects has been removed. If your app requires a callback that executes when the
size of the axes changes, create a SizeChangedFCn
callback for
the parent figure or another container.
R2020b: Colorbars and legends displayed with UIAxes
have the same parent as UIAxes
When you create a plot in a UIAxes
object, and then create a
colorbar or legend for that plot, the parent object of the colorbar or legend is the
same as the parent object of the UIAxes
object. In previous
releases, the parent object of the colorbar or legend is the
UIAxes
object.
R2020b: Control the alignment of a plot title with the TitleHorizontalAlignment
property
You can control the alignment of a plot title by setting the
TitleHorizontalAlignment
property of the axes to
"left"
, "right"
, or
"center"
.
R2020b: Create and style subtitles with the Subtitle
and SubtitleFontWeight
properties
Add a subtitle to your plot by setting the Subtitle
property
or calling the subtitle
function. To control the appearance of the subtitle, set
the SubtitleFontWeight
property.
R2020a: Preserve inner or outer position with the PositionConstraint
property
Set the PositionConstraint
property of an
Axes
object to control the space around the plot box when you
add or modify decorations such as titles and axis labels.
R2019b: Changing ColorOrder
or LineStyleOrder
affects existing plots immediately
If you change the axes ColorOrder
or
LineStyleOrder
properties after plotting into the axes, the colors
and line styles in your plot update immediately. In R2019a and previous releases, the new
colors and line styles affect only subsequent plots, not the existing plots.
To preserve the original behavior, set the axes ColorOrderIndex
or
LineStyleOrderIndex
property to any value (such as its current
value) before changing the ColorOrder
or
LineStyleOrder
property.
R2019b: Indexing scheme for ColorOrder
and LineStyleOrder
might change plot colors and line styles
There is a new indexing scheme that enables you to change the colors and line styles of
existing plots by setting the ColorOrder
or
LineStyleOrder
properties. MATLAB applies this indexing scheme to all objects that have a
ColorMode
, FaceColorMode
,
MarkerFaceColorMode
, or CDataMode
. As a
result, your code might produce plots that cycle though the colors and line styles
differently than in previous releases.
In R2019a and earlier releases, MATLAB uses a different indexing scheme which does not allow you to change the colors of existing plots.
To preserve the way your plots cycle through colors and line styles, set the axes
ColorOrderIndex
or LineStyleOrderIndex
property to any value (such as its current value) before plotting into the axes.
Commande MATLAB
Vous avez cliqué sur un lien qui correspond à cette commande MATLAB :
Pour exécuter la commande, saisissez-la dans la fenêtre de commande de MATLAB. Les navigateurs web ne supportent pas les commandes MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)