Main Content

Setup for Tuning MATLAB Models

Model control systems in MATLAB® for command-line tuning

You can tune a control system that is represented in MATLAB by a generalized state-space (genss) model. Create such a model by interconnecting elements that represent the fixed and tunable components of your control system. See Building Tunable Models.

Fonctions

développer tout

tfTransfer function model
zpkZero-pole-gain model
ssState-space model
tunableGainTunable static gain block
tunableTFTunable transfer function with fixed number of poles and zeros
tunablePIDTunable PID controller
tunablePID2Tunable two-degree-of-freedom PID controller
tunableSSTunable fixed-order state-space model
realpReal tunable parameter
AnalysisPointPoints of interest for linear analysis
connectBlock diagram interconnections of dynamic systems
feedbackFeedback connection of multiple models

Rubriques

  • Building Tunable Models

    Build a control-system model for tuning with systune or looptune using numeric LTI models for fixed elements and control design blocks for the tunable elements.

  • Generalized Models

    Generalized models represent systems having a mixture of fixed coefficients and tunable or uncertain coefficients.

  • Models with Tunable Coefficients

    Use tunable models to model tunable components of control systems for parameter sampling or control system tuning.

  • Mark Signals of Interest for Control System Analysis and Design

    Analysis points allow you to access to internal signals, perform open-loop analysis, or specify requirements for controller tuning in systems modeled in either MATLAB or Simulink®.

Informations connexes